DEEneo-ISC (Inline Signal Conditioner)
The DEEneo-ISC inline signal conditioner was developed for operating inductive LVDT sensors (full bridge) and is integrated into the sensor connection cable and the follow-up product to the eddylab LVDT cable electronics KAB. The electronics housing is unchanged so that the old and new electronics can be exchanged 1:1 in terms of geometry and cabling.
Key Facts
- DEEneo-ISC inline signal conditioner was developed for operating inductive LVDT sensors (full bridge) and is integrated into the sensor connection cable. The electronics supply the sensor and convert the sensor signal into a standardized, analogue output signal with the help of a microcontroller.
- DEEneo-ISC is designed for the operation of eddylab LVDT displacement transducers with fixed cable output or 4-pin M12 connector output.
- Operation of all commercially available LVDT sensors is also possible. Please contact eddylab for the connection of sensors from other manufacturers at: sales@eddylab.de.
- The frequency and amplitude can be set using the eddySetup configuration software for optimum performance ofthe measuring chain. A pushbutton (SET button) is used for basic configuration and for setting the measuring range limits - this enables quick and easy adaptation to the customer‘s application.
- Where possible, eddylab calibrates the sensor and electronics as a measuring chain. The sensor characteristic
curve can be linearized to meet the highest accuracy requirements.
Successor model:
DEEneo-ISC
Features:
- Power supply: 9…36 VDC
- Output signal: Selectable 0…20 mA, 4…20 mA, 0…5 V, 0…10 V, ±5 V, ±10 V
- Signal processing: digital via microprocessor
- Resolution: 16 bit
- Current consumption: 70 mA at 24 VDC, 130 mA at 12VDC
- Sensor supply: Standard / 3V / 3.3 kHz,
Configurable on software side
- Cable break detection: Yes
- Switching output: Yes
- Signal adjustment via SET button
- Linearisation sensor characteristic curve: optional available
Predecessor model:
KAB Kabelelektronik
Features:
- Power supply: 9…36 VDC
- Output signal: Selectable, 0…20 mA, 4…20 mA, 0…5 V, 0…10 V, ±5 V, ±10 V
- Signal processing: analog
- Resolution: converted approx. 13 bit
- Current consumption: 75 mA at 24 VDC, 150 mA at 12VDC
- Sensor supply: Standard / 3V / 3.3 kHz,
Configurable on hardware side
- Cable break detection: Yes
- Switching output: No
- Signal adjustment via dip switch and trimming potentiometer
- Linearisation sensor characteristic curve: No
Technical drawings
